Product
Ingersoll Rand 54672530 Air Filter Element | N55/N75 Screw Compressor Intake
Genuine Ingersoll Rand 54672530 air filter element for N55/N75 screw compressors. 247 mm OD, 365 mm height, 5–10 μm filtration, synthetic fiber media with low pressure drop and high dust holding capacity. Cross-reference SA17281; match by serial number for exact fit.
- Export packaging & documentation support
- OEM / ODM customization available
- Sample and bulk order workflow
Product Overview
The Ingersoll Rand 54672530 air filter element is a genuine intake filter designed for N55 and N75 series screw air compressors. Its high-efficiency synthetic fiber and glass fiber media capture airborne dust and particulate before they reach the airend, helping protect rotors, bearings, and shaft seals from abrasion and extending compressor service life.
The 54672530 is a large cylindrical pleated element with a red polyurethane (PU) end cap seal. It cross-references HiFi Filter SA17281 and is also compatible with several Atlas Copco part numbers. For exact fitment, provide your compressor serial number and we will confirm against the original parts diagram.
Key Specifications
- Part number: 54672530
- Brand: Ingersoll Rand
- Type: Air filter element / intake filter
- Applications: N55, N75 screw compressors
- Cross-reference: HiFi SA 17281; Atlas Copco 1613950100, 1613951000, 1631043700, 2255300129
- Outer diameter: 247 mm
- Inner diameter: 150 mm
- Overall height: 365 mm
- Weight: approx. 5 kg
- Filtration accuracy: 5–10 μm
- Filtration efficiency: approx. 99% @ 10 μm
- Filter class: F7–F8 (EN 779 / ISO 16890)
- Dust holding capacity: approx. 1.0–1.5 kg
- Initial pressure drop: approx. 250–350 Pa at rated flow
- Alarm / final resistance: 700 Pa alarm; 900 Pa final (replace immediately)
- Media: Synthetic fiber / glass fiber, yellow pleated paper
- Support: Galvanized expanded metal mesh, inner and outer
- End cap: Red polyurethane (PU)
- Seal: Red nitrile rubber (NBR), top and bottom
- Operating temperature: −20 °C to 80 °C continuous; 100 °C short-term
- Collapse pressure resistance: ≥ 4.0 kPa
- Service life: approx. 4,000 h (8–12 months) standard; 2,000–3,000 h in high-dust conditions
- Shelf life: 36 months in sealed, dry storage
Standards & Compliance
- ISO 5011 — intake filter performance testing for compressors and engines
- ISO 16890 / EN 779 — general ventilation air filter classification
- GB/T 14295 — air filters
- GB/T 6165 — air filter performance test methods
Installation & Maintenance
Replacement interval: every 4,000 hours or 8–12 months under standard conditions, whichever comes first; every 2,000–3,000 hours in high-dust environments. Replace immediately if the media is visibly darkened or loaded, or if differential pressure reaches 900 Pa.
- Isolate and lock out the compressor main power (LOTO) and confirm the unit has fully stopped.
- Release the filter housing cover bolts or clamps and remove the cover.
- Withdraw the old 54672530 element and check that no seal remains in the housing groove.
- Wipe the housing interior and sealing surface clean of dust and debris.
- Inspect the new element: confirm part number 54672530, check media for damage, end cap cracks, or aged red seal.
- Insert the new element vertically into the housing center, ensuring both seals seat correctly without tilting.
- Refit the cover and tighten bolts or clamps evenly.
- Start the compressor and check for air leakage at the filter housing.
Ordering & Fitment Support
Suitable for Ingersoll Rand N-series models N55 and N75. To confirm exact fitment, send us the complete compressor serial number and we will verify against the original parts diagram and confirm current stock availability. Export packing and documentation are arranged per order; request a quotation or datasheet for your required quantity.
FAQ
Is 54672530 a genuine Ingersoll Rand part?
The 54672530 is a genuine Ingersoll Rand replacement element with yellow high-efficiency media and a red polyurethane end cap seal, specified for N55/N75 screw compressors.
Which models does it fit?
Ingersoll Rand N55 and N75 screw compressors. If you are unsure, provide the compressor serial number for verification.
What is the cross-reference number?
HiFi Filter SA 17281. It is also compatible with Atlas Copco part numbers 1613950100, 1613951000, 1631043700, and 2255300129.
What are the dimensions?
Outer diameter approx. 247 mm, inner diameter approx. 150 mm, overall height approx. 365 mm, weight approx. 5 kg.
How do I know when to replace the element?
Replace if the media is visibly darkened or heavily loaded, if differential pressure reaches the 700 Pa alarm value, or at the 4,000-hour or 8–12 month interval.